Heatshield Products
01. The Heat Is Off
You can protect your cab interior from excessive heat generated by drivetrain components, exhaust systems, and conditions with HP Sticky Shield insulation from Heatshield Products. The 1/8-inch-thick fiberglass-based insulation contains a 0.003-inch layer of aluminum to deflect as much as 90 percent of radiant heat. Pre-cut sheets can be trimmed with heavy scissors, have a peel-and-stick adhesive backing that sticks to most surfaces, and are flexible enough to conform to floorpans, firewalls, trans tunnels, and other areas where heat deflection is desired. The material can withstand continuous temperatures as high as 1,100 degrees F, and intermittent heat as high at 2,000 degrees. For more information contact Heatshield Products at (844) 723-2665 or www.heatshieldproducts.com.
Permatex
02. A Cleaner Cleaner
The Permatex extensive catalog of automotive maintenance and repair chemical products has expanded with the recent addition to its Fast Orange Hand Cleaner line. Fast Orange Anti-Bacterial Foaming Hand Wash has the advantage if an antibacterial formulation to kills germs while cleaning your hands. Along with removing dirt and grease, this new cleaner is created to disinfect your hands after using a hand cleaner, without drying them out. The cleaner is available in a fresh scent and is available in a 7.5-ounce foaming pump bottle, and has a mild, neutral fresh scent. For more information contact Permatex at (877) 376-2839 or www.permatex.com.
Eddie Motor Sports
03. Handles Like New
Make an instant and easy improvement to the exterior of your 1967-1972 Chevy C10 truck by replacing those old original pot metal door handles with these brand-new parts from Eddie Motorsports. Manufactured as a direct replacement, these high-quality handles are precision CNC machined from 6061-T6 billet aluminum, making them more durable and not susceptible to rust and pitting. Eddie Motorsports offers the handles in your choice of five different styles and nine different finishes. The handles are made in America, and are sold in pairs, along with all the gaskets and quality stainless steel fasteners required for simple installation. For more information contact Eddie Motorsports at (888) 813-1293 or www.eddiemotorsports.com.
Trick-Tools
04. Covell’s Tools
Have you ever wondered how master metalworker Ron Covell can convince a piece of sheetmetal to do exactly what he wants it to? It’s a combination of knowing what to do, possessing the talent to do it, and having the right tools for the job. Trick-Tools has helped with the third part of that by strategy by teaming up with Ron Covell to develop a set of metal shaping tools. The Covell Signature Line body hammers and dolly blocks incorporate Covell’s favorite designs, perfected during more than 50 years of metal shaping experience and success. These high-quality hand tools are American-made and built to last for years of regular and frequent use. For more information contact Trick-Tools at (641) 628-3860 or www.trick-tools.com.
Speedway Motors
05. Two Chamber Tone
Quality mufflers do more than replace ear-splitting noise with a desirable exhaust tone; they improve your truck’s performance by contributing to the scavenging effect, which pulls exhaust from the engine. These welded chamber mufflers from Speedway Motors have a dual chamber design, which provides a lower, throatier note than many single-baffle mufflers—and improves scavenging. Speedway’s mufflers feature a heavy, fully welded, 16-gauge steel case, and come finished in a high-temperature black coating. Inlets and outlets are available in 2.25-, 2.5-, and 3-inch sizes, and several different centered and offset orientations. For more information contact Speedway Motors at (800) 979-0122 or www.speedwaymotors.com.
Wilwood
06. Slow Down Easy
If you’ve been planning on improving the stopping performance of your early F-series Ford by swapping the front drum for discs, now is the time. Wilwood offers a new Classic Series front brake system specifically designed for 1948-1956 Ford F-series pickups. The new bolt-on disc brake conversion kit makes the upgrade easy since it doesn’t require any extra modifications to your truck. The package comes with 11.72-inch-diameter heavy-duty rotors, forged aluminum four-piston Superlite calipers, and BP-10 compound metallic-composite SmartPads. In addition, it includes precision mounting brackets, all necessary hardware, and detailed installation instructions. For more information contact Wilwood at (805) 388-1188 or www.wilwood.com.
The post New Parts From The Classic Truck Aftermarket appeared first on Hot Rod Network.